Featured article
Solutions
Products
Resources
User guide
Admin web UI
Once your FW2000e is connected to a device that supports web browsing, you can use the Admin web UI to customize settings, change your password, and access information. On a device connected to the FW2000e, open any web browser, and go to http://192.168.1.1, or http://Inseego.local*. The initial sign in password is: “Fast5G!”.
NOTE: You cannot connect to the web UI through a router. Your computer must be directly connected by Ethernet cable to the Data In port on the FW2000e PoE power injector.
| *The Inseego.local web UI address relies on having IPv6 enabled on your connecting device. |