My FW2000e is getting slow speeds/low throughput

Reason: Signal strength and quality are the most likely cause of slow speeds/low throughput. NOTE: The FW2000e is configured by default to use the best connection available, so low throughput is rarely related to configuration.

Solution: Check the signal strength and quality reported by your FW2000e:

  1. Access the FW2000e Admin web UI and navigate to About > Diagnostics to check the values for Signal Strength (RSRP) and SNR.
  2. If the signal is good, but throughput is slow, check your service provider’s network conditions for outages and expected performance.
In this article
Inseego