Changing the Admin password

To change the Admin password:

Important: If you are in the process of adding your FW2000e to Inseego Connect, wait to change your Admin password until the registration process is complete and your FW2000e is listed on the Inseego Connect Device List page.

1. From the Admin web UI: Click the down arrow next to Sign Out in the top-right corner of any Admin web UI page and select Change Password.

From Inseego Connect: Select Device > Admin Password from the Configure side menu.

2. Enter your current Admin password, then enter a new password and confirm it.

NOTE: The new password must have a length between 8 and 63 characters and contain the following: upper-case letter, lower-case letter, digit, and special character.

3. Select a security question from the drop-down list and type an answer to the question in the Answer field.

NOTE: Answers are case-sensitive.

4. Click Save Changes.

The next time you sign in to the FW2000e Admin web UI, use the new Admin password. If you cannot remember the password, click I forgot the Admin password. After you correctly answer the security question you set up, the current password is displayed.

In this article
Inseego