Fixed wireless & mobile

Use this tab to enable WAN automatic switching, set WAN priorities, configure health checks (keep alive, failover, failback, and lookup addresses), and enable rate shaping on WAN interfaces.

Data Transmission Setting

Automatic WAN Switching

Can’t find what you’re looking for?

If you have any questions or need information about a specific product, have you tried searching our Help Center yet? Our Help Center is a comprehensive resource designed to assist you with product queries and troubleshooting.

Search Help Center

In this article

Quick Start Guide

User Guide

Introduction and getting started

Overview

Getting started

Installing a SIM card

Placing your router

Connecting external antennas (optional)

Mounting your FX4200 (optional)

Powering on

Connecting devices to the router

Connecting devices wirelessly

Connecting devices with Ethernet or USB

Monitoring and managing your router

Admin web UI

Inseego Connect

Inseego Mobile app

Pairing mesh nodes (optional)

Caring for your router

Replacing a SIM card

Battery tips

Replacing the battery

Resetting your router

Care tips

Configuration

Overview

Admin password

Admin password overview

Changing the admin password

Managing devices

Overview tab

Internet Info tab

Internet Info tab overview

Managing your network

Cellular tab

Overview

Network Locked

Cellular Network Technology

Cellular Settings

SIM Settings

Data Transmission Setting

Manage SIM Slots

APN Settings

APN Connection Profiles

Wi-Fi tab

LAN tab

Data Transmission Setting

WAN tab

Overview

Automatic WAN Switching

WAN Interface Priority Order

WAN Switching Rules

Enable Keep Alive and Failover

Managing routing

Managing routing overview

Manage NAT Routing Type

Restrict Internet Access For Applications

Direct Incoming Traffic to a Connected Device

Managing security

Using tools

Setting administration options

Software tab

Software tab overview

Software Versions

Mesh Node(s) Software

Notes on software updates

Backup and Restore

Preferences tab

Preferences tab overview

Troubleshooting and support

Troubleshooting overview

Troubleshooting topics

Will I always get 5G? Can I use the router outside of 5G coverage?

The device status LED is switching from blue to green

Can I set my router to use a specific cellular band?

My router is not booting up

I cannot access the admin web UI

The cellular status LED is blinking red

My older device cannot connect

My connecting device is not obtaining a valid IP address

My connected device cannot connect to Fortinet VPN

Devices connected via Ethernet are not getting internet

My router is getting slow speeds/low throughput

I cannot get streaming platforms to work with my router

Do I need external antennas?

Do I need a signal amplifier or booster?

Does the USB port support RNDIS?

Technical support

Product specifications and regulatory information

Product specifications

Regulatory information

Federal Communications Commission Notice (FCC – United States)

Innovation, Science and Economic Development Notice (ISED – Canada)

Cellular external antenna considerations

Product certifications and supplier’s declarations of conformity

Wireless communications

Limited warranty and liability

Safety hazards

Proper battery use and disposal

Datasheet