User Guide

To power your router on, follow these steps:

1. Plug the USB C cable into the router power port. Plug the other end into any of the following:

• 24W (12V, 2A) AC power adapter (provided)
• USB-powered hub
• USB power delivery (PD) host equipment

WARNING! Use only the AC wall adapter power supply and cable that are packaged with the FX4100 5G Cellular Router. Using an unapproved wall adapter or cable are done at the risk of the user.

2. Wait for the router to power on. This can take up to three minutes. You’ll know it’s powered on when the device display shows “T-Mobile” and arrows indicating traffic is active.

NOTE: The display times out after 60 seconds, If it is dark, press the button to the right.

3. If you have fewer than four bars, adjust the location of the router until you have four or five bars and the cellular status LED is cyan (4 bars) or blue (5 bars).

NOTE: To power the router off, simply disconnect it from the power supply.