Featured case study
User guide
I cannot access the Admin web UI
- Reason: It is not possible to connect to the web UI through a router.
Solution: Your computer must be directly connected by Ethernet cable to the Data In port on the FW3000 PoE power injector. - Reason: You need a valid connection to access the web UI using http://192.168.1.1.
Solution: If you are unable to connect to http://192.168.1.1, use http://Inseego.local*, or http://fw3000.com.
| *The Inseego.local web UI address relies on having IPv6 enabled on your connecting device. |