Installation guide
- Product documentation
- Inseego Wavemaker™ FW2000e
- Installation guide
Step one: gather tools and materials
- Appropriate equipment to safely install the device at optimum height, e.g. ladder, scissor lift, bucket truck
- Round 4.5mm to 6.5mm Cat6A PoE (Power over Ethernet) cable (RJ45 fittings attached)
- Smartphone/device for Inseego Mobile™ app with Bluetooth® enabled
- SIM card (4FF Nano)
- Phillips-head screwdriver
- M6 4mm hex driver
- Drill
- 14mm socket wrench/driver
- Ground wire #10 AWG
- Cat6A shielded outdoor or direct burial cable*
- Bishop tape (roofing sealant)
- Silicone sealant (wall penetrations)
- Flexible cable clips, nail clips, or vinyl siding clips
Your FW2000e package includes: FW2000e device, PoE injector, and SIM tool.
NOTE: Mount installation packages are ordered and shipped separately.
*Flooded cable is recommended to prevent water intrusion. |