Introduction

You can use multiple tools to configure and troubleshoot your FW3000:

Admin web UI – Provides a local gateway to configure and manage your FW3000. On a device connected to the FW3000, open any web browser, and go to http://192.168.1.1, http://Inseego.local*, or http://fw3000.com. Select Sign In (in the top-right corner of the screen) and enter the Admin Password (“Fast5G!” is the default).

NOTE: To access the web UI, it is simplest to connect to your computer directly by Ethernet cable to the Data In port on the FW3000 PoE power injector. If connecting through a router, ensure the router is configured to route all requests to the FW3000 LAN IP using the appropriate interface of the router; many routers will have a function to define a static route to accomplish this.

When IPPT is enabled, any time you switch the device you are connecting to the FW3000, you must first disconnect the existing connected device and power cycle the FW3000 before connecting the new device.

Inseego Connect – Enables you to monitor and configure an entire deployment of devices remotely from the cloud. You can group devices together to push widespread configurations, troubleshoot individual devices, set alarms, and run reports. To learn more about the benefits of Inseego Connect, go to https://inseego.com/products/cloud-management/inseego-connect/. You can sign up for a free Inseego Connect account at connect.inseego.com.

Inseego Mobile app – Allows you to perform basic device monitoring and management. Scan the QR code to download the Inseego Mobile app from Apple Store or Google Play Store, or visit https://inseego.com/products/cloud-management/inseego-mobile-app/#available-now to download the app.

This chapter provides the configuration options available for your FW3000 devices. The configurations shown are from the Admin web UI, unless otherwise noted. Many of these options are also available with Inseego Mobile app and Inseego Connect. Some configurations are available only with Inseego Connect and are marked as such.

*The Inseego.local web UI address relies on having IPv6 enabled on your connecting device.
In this article