Installation guide

You can use multiple options to monitor and manage your 5G outdoor CPE:

• FW2000e Admin web UI - Access the web UI for a full set of device management features. Typically, http://192.168.1.1 provides web UI access, however under certain conditions http://Inseego.local* is required. The initial sign in password is: “Fast5G!”.

NOTE: You cannot connect to the web UI through a router. Your computer must be directly connected by Ethernet cable to the Data In port on the FW2000e PoE power injector.

• Inseego Connect™ - Enables you to monitor and configure an entire deployment of devices remotely from the cloud. You can group devices together to push widespread configurations, troubleshoot individual devices, set alarms, and run reports. To learn more about the benefits of Inseego Connect, go to https://inseego.com/products/cloud-management/inseego-connect/. You can sign up for a free Inseego Connect account at connect.inseego.com.
• Inseego Mobile app - Use the same mobile app you used to install your FW2000e for routine device monitoring and management.