Installation guide
- Product documentation
- Inseego Wavemaker™ FW2000e
- Installation guide
Step one: attach the FW2000e to the device elevation bracket
![](https://cdn.inseego.com/images/trgu17ld/production/11170bcb923744cb6c676f9af8b9a0cfc2a1a3a1-1069x1331.png?auto=format)
- Attach a ground wire to the back of the device with the ground screw.
![](https://cdn.inseego.com/images/trgu17ld/production/5530fe95f4feadc444c879eb6bccc68c6f90128f-490x253.png?auto=format)
- Place the M6 external locking washers on the M6 21mm bracket mount bolts.
![](https://cdn.inseego.com/images/trgu17ld/production/cfcfea9fcd3e4a5bc8ab4759e3f2a88e8f5bc9d8-314x147.png?auto=format)
- Mount the device to the device elevation bracket using a hex driver to tighten the bolts to 2.0 Nm (1.48 ft/lb).
![](https://cdn.inseego.com/images/trgu17ld/production/92a70b6e1a28dd8a2ea26eeed84368fd6d4dd667-353x479.png?auto=format)