Featured article
Solutions
Products
Resources
User guide
Admin web UI
Once your FW3000 is connected to a device that supports web browsing, you can use the Admin web UI to customize settings, change your password, and access information. On a device connected to the FW3000, open any web browser, and go to http://192.168.1.1, http://Inseego.local*, or http://fw3000.com. The initial sign in password is: “Fast5G!”.
NOTE: To access the web UI, it is simplest to connect to your computer directly by Ethernet cable to the Data In port on the FW3000 PoE power injector. If connecting through a router, ensure the router is configured to route all requests to the FW3000 LAN IP using the appropriate interface of the router; many routers will have a function to define a static route to accomplish this.
| *The Inseego.local web UI address relies on having IPv6 enabled on your connecting device. |