The Admin password is what you use to sign into the FW3000 Admin web UI. The default Admin password is “Fast5G!”.
You are prompted to change the Admin password upon first login. Change the password to something easy to remember and set up a security question that will help you securely recover your password if you forget what you changed it to.
Important: It is critical that you change the Admin password from the default to keep the device and your network secure.
Changing the Admin password
To change the Admin password:
Important: If you are in the process of adding your FW3000 to Inseego Connect, wait to change your Admin password until the registration process is complete and your FW3000 is listed on the Inseego Connect Device List page.
1. From the Admin web UI: Click the down arrow next to Sign Out in the top-right corner of any Admin web UI page and select Change Password.
From Inseego Connect: Select Device > Admin Password from the Configure side menu.
2. Enter your current Admin password, then click Continue.
3. Enter a new password and confirm it.
NOTE: The new password must have a length between 8 and 32 characters and contain the following: upper-case letter, lower-case letter, digit, and special character.
4. Select a security question from the drop-down list and type an answer to the question.
NOTE: Answers are case-sensitive.
5. Click Save Changes.
The next time you sign in to the FW3000 web UI, use the new Admin password. If you cannot remember the password, click Forgot Admin password. After you correctly answer the security question you set up, the current password is displayed.
