User guide

By default, software updates are delivered to the FW3000 automatically over the mobile network. This tab displays your current software version, last system update information, and software update history. You can opt out of automatic updates and check for new software updates at any point, allowing you flexibility of when updates occur. NOTE: If you miss updates, you risk missing critical safety and security updates as well as the latest features.

NOTE: If the FW3000 is used on a private APN or cellular network, or if access is limited to specific sites, you must include the following URL in the access list so that automatic software updates can be delivered and you can check for updates: https://fota.production.nvtl.mifiupdates.com (TCP 443).

Current Software

Modem Software Version: The version of software currently installed for the modem component.

OS Version: The version number for the operating system and its components.

Cute Version: The cute version of the software currently installed on your FW3000.

PRI Version: The configuration version currently applied to your FW3000.

Automatic Software Updates

By default, software updates are automatically delivered to your FW3000. This setting allows you to turn off automatic software updates. If you do not want software updates automatically delivered, move the ON/OFF slider to OFF.

Check for New Software Update

Last check for update: The date and time the FW3000 last checked to see if an update was available.

Update status: This area is usually blank. If you check for an update, the results display.

Check for Update: Click this button to manually check for available software updates. If a new software update is available, it is automatically downloaded.

Last Software Update

This section displays details about the last software update.

Software Update History

This section provides details of the last two updates downloaded and installed to this FW3000. If no updates have been installed, this section displays the current software version.