User guide

WAN settings are available only with Inseego Connect. To learn more about the benefits of Inseego Connect, go to https://inseego.com/products/cloud-management/inseego-connect/. You can sign up for a free Inseego Connect account at connect.inseego.com.

Use this page to enable and configure WAN keep alive. Keep alive allows for a persistent WAN connection.

WAN

Enable WAN Keep Alive: If ON, keep alive verifies lookup addresses to check the Internet connectivity on the WAN connection.

Lookup Address 1: Enter the first IP address to verify the WAN connection.

Lookup Address 2: Enter the second IP address to verify (if Lookup Address 1 does not respond with keep alive acknowledgement (ACK)).

Lookup Address 3: Enter the third IP address to verify (if Lookup Address 2 does not respond with keep alive ACK).

Keep Alive Interval: Enter the desired number of seconds without receiving a valid packet before the first keep alive verification occurs.

Number of Attempts: Enter the number of times to retry after verification failure for all three lookup addresses.

Retry Interval: Enter the number of seconds between verification retries.

Click Save to Device to save new settings.