Quick Start Guide

You can pair your X700 with an Inseego router using Wi-Fi or Ethernet.

Pairing with Wi-Fi

To initiate Wi-Fi pairing, use the interactive device display on your router or the admin web UI.

Pair with the device display

• Ensure the router and mesh node are within 10 to 50 feet of one another. You can position the mesh node after pairing.
• Press the device display button on your router repeatedly until you see Wi-Fi Mesh: Hold button to add.
• Press and hold the display button.
• When prompted, press the Mesh button on the back of the X700.

NOTE: You must push the Mesh button within 30 seconds.

• Wait - pairing takes 2 - 3 minutes. The light on the X700 and the
  Wi-Fi status LED on the router blink blue while pairing.
• When the display shows Wi-Fi Mesh: Paired! and the light on the mesh node is a solid color, pairing is complete.

OR

Pair with the admin web UI

• Ensure the router and mesh node are within 10 to 50 feet of one another. You can position the mesh node after pairing.
• Go to http://192.168.1.1 to access the admin web UI for your router. Navigate to Wi-Fi > Mesh.
• Click Add Node on the admin web UI Mesh tab.
• Within 30 seconds, press the Mesh button on the back of the X700.
• Wait – pairing takes 2 – 3 minutes. The light on the X700 and the Wi-Fi status LED on the router blink blue while pairing.
• When Wi-Fi status LED on the router is solid blue and the LED on the mesh node is a solid color, pairing is complete.

Pairing with Ethernet

• Connect an Ethernet cable from the X700 to a LAN port on the router.
• Pairing is automatic. The LED on the X700 blinks blue while pairing. When pairing is complete the LED is solid.
• When you disconnect the Ethernet cable, the X700 remains paired via Wi-Fi.