X700 Quick Start Guide
- Product documentation
- Inseego Wavemaker™ FX4100
- English
- X700 Quick Start Guide
Step three: pair the X700
You can pair your X700 with an FX4100 cellular router using Wi-Fi or Ethernet.
Pairing with Wi-Fi
To initiate Wi-Fi pairing, use the interactive device display on the FX4100 or the Admin web UI.
Pair using the FX4100 device display
- Press the device display button on the FX4100 repeatedly until you see Wi-Fi Mesh: Hold button to add.
- Press and hold the device display button.
- When prompted by the display, press the Mesh button on the back of the X700 within 30 seconds.
- The LED on the X700 and the router blink blue while pairing. Pairing typically takes 2-3 minutes.
- When the display shows Wi-Fi Mesh: Paired! and the LED on the mesh node is a solid color, pairing is complete.
OR
Pair using the Admin web UI
- Go to http://192.168.1.1 to access the Admin web UI for the FX4100. Navigate to Wi-Fi > Mesh.
- Click Add Node on the UI Mesh tab.
- Within 30 seconds, press the Mesh button on the back of the X700.
- The LED on the X700 and the router blink blue while pairing. Pairing typically takes 2-3 minutes.
- When Wi-Fi status LED on the router is solid blue and the LED on the mesh node is a solid color, pairing is complete.
Pairing with Ethernet
- Connect an Ethernet cable from the X700 to the FX4100 you are pairing with.
- Pairing is automatic. The LED on the X700 blinks blue while pairing. When pairing is complete the LED is solid.
- When you disconnect the Ethernet cable, the X700 remains paired via Wi-Fi.
Previous
Step two: power on the X700
Next
Step four: find a location for your X700