Installation guide
- Product documentation
- Inseego Wavemaker™ FW2000e
- Installation guide
Step two: attach the FW2000e to the wall mount bracket
- Attach a ground wire to the back of the device with the ground screw.
![](https://cdn.inseego.com/images/trgu17ld/production/7715606798945ec6d0659de4dbf1e3be5c32c0da-435x218.png?auto=format)
- Place the M6 external locking washers on the four M6 21mm bracket mount bolts.
![](https://cdn.inseego.com/images/trgu17ld/production/91d516c9053b7818d21a08cf54c847de2ce428f7-291x140.png?auto=format)
- Attach the wall mount bracket to the FW2000e using a hex driver to tighten the bolts to 2.0 Nm (1.48 ft/lb).
![](https://cdn.inseego.com/images/trgu17ld/production/a966a31c558688acd89d7b727ec10ac003baad0f-383x583.png?auto=format)