Installation guide
- Product documentation
- Inseego Wavemaker™ FW2000e
- Installation guide
Step two: attach the FW2000e to the pole mount bracket
- Attach a ground wire to the back of the device with the ground screw.
![](https://cdn.inseego.com/images/trgu17ld/production/3dd577c3d0bee801b448f0289f2346de5ddb5d94-446x228.png?auto=format)
- Place the M6 external locking washers on the four M6 21mm bracket mount bolts.
![](https://cdn.inseego.com/images/trgu17ld/production/fc8038f31b17d5a636b740d75ca2e9d241a366d8-308x152.png?auto=format)
- Attach the pole mount bracket to the FW2000e using a hex driver to tighten the bolts to 2.0 Nm (1.48 ft/lb).
![](https://cdn.inseego.com/images/trgu17ld/production/c39cdbcfbc5b260cbc54502b33ccf8a1cffac82e-316x487.png?auto=format)