My FW3000 is getting slow speeds/low throughput

Reason: Signal strength and quality are the most likely cause of slow speeds/low throughput.

NOTE: The FW3000 is configured by default to use the best connection available, so low throughput is rarely related to configuration.

Solution: Check the signal strength and quality reported by your FW3000:

  1. Access the FW3000 Admin web UI and navigate to About > Diagnostics to check the values for Signal Strength (RSRP) and SNR.
  2. If the signal is good, but throughput is slow, check your service provider’s network conditions for outages and expected performance.
In this article