I cannot access the Admin web UI

  • ­Reason: It is not possible to connect to the web UI through a router.

    Solution:
    Your computer must be directly connected by Ethernet cable to the Data In port on the FW3000 PoE power injector.
  • Reason: You need a valid connection to access the web UI using http://192.168.1.1.

    Solution:
    If you are unable to connect to http://192.168.1.1, use http://Inseego.local*, or http://fw3000.com.
*The Inseego.local web UI address relies on having IPv6 enabled on your connecting device.
In this article