Featured article
Solutions
Products
Resources
User guide
Connecting to the FW3000
To turn on your FW3000 and connect a device:
1. Check that the PoE cable from the FW3000 is in the Data & Power Out port on the PoE power injector and the PoE power injector is plugged into an earthed AC outlet.
2. Insert one end of a Cat6A Ethernet cable into the Data In port on the PoE power injector.
3. Insert the other end of the cable into the Ethernet port of the device you wish to connect.
WARNING! Use only the PoE power injector supplied with the FW3000. Unapproved power supplies could cause overheating or fires, resulting in serious bodily injury, death, or property damage. Do not defeat the safety purpose of a grounding-type plug. Use the PoE power injector only in combination with an earth-socked outlet.