EDGE Manager quick start guide

Overview

Follow these steps in the order provided to set up your EDGE Manager.

Step one: obtain an Open Virtual Appliance (OVA)

Contact your Inseego Sales representative to obtain an OVA.

Step two: deploy the OVA

Refer to the VM deployment guide.

Step three: configure port forwarding and any necessary firewall rules

Refer to Configure port forwarding and any necessary firewall rules.

Step four: prepare EDGE Manager

Refer to Prepare EDGE Manager.

Step five: set EDGE Manager hostname (optional)

Refer to Set EDGE Manager hostname.

Step six: provision SSL certificate (optional)

Refer to Provision SSL certificate.

Step seven: initialize EDGE Manager

Refer to Initialize EDGE Manager.

Step eight: upgrade EDGE Manager via CLI (as needed)

Refer to Upgrade EDGE Manager via CLI.

Step nine: log in and change password

Refer to Log in and change password.

Step ten: license EDGE Manager

Refer to License EDGE Manager.

Step eleven: Zero Touch Provision (ZTP) devices to onboard

Refer to Zero Touch Provision (ZTP) devices to onboard.

Step twelve: onboard devices in EDGE Manager

Refer to Onboard devices in EDGE Manager.

Step thirteen: deploy ZTNA Broker (optional)

Refer to the VM deployment guide.

Refer to the ZTNA Broker quick start guide.